Microfiber Cloth For Cleaning Glass: A clean and shining mirror installed in the house increases the beauty of the entire room. But it is not easy to always keep the mirror clean. Sometimes fingerprints appear on it and sometimes dust, water drops or other stains become visible. Toothpaste and water marks on bathroom mirrors are also common. The biggest problem is when after cleaning the mirror, white lines and spots remain on it. Many times, the more you rub a mirror with a cloth, the more blurry it appears. However, there is no need for any expensive cleaner to clean the mirror without leaving streaks. The right cloth and cleaning method can make a big difference.
use the right clothes
The most important thing while cleaning a mirror is to choose the right cloth. Microfiber cloth can be a good option for this. It absorbs dust and moisture easily and generally does not leave fibers on the surface. If microfiber cloth is not available then clean and soft cotton cloth can be used. At the same time, avoid tissue or such clothes whose fibers can stick to the mirror. Keep two cloths for better cleaning. Clean the mirror with one cloth and finally wipe it with another dry cloth.
Do not apply more cleaner than necessary
It is not necessary that spraying more cleaner on the mirror will make it cleaner. If you apply too much cleaning liquid, it may be difficult to wipe it off completely and streaks may appear on the mirror after it dries. Therefore, a light spray of cleaner is sufficient. If the mirror frame is made of wood or any other material that can be damaged by moisture, it is better to apply the cleaner on a cloth instead of spraying the cleaner directly on the mirror.
Make cleaner with vinegar and water
Easy cleaning solution can be prepared to clean mirrors at home also. For this, a small amount of white vinegar can be mixed in water. Vinegar can help remove grease and fingerprints from mirrors. Fill the prepared mixture in a spray bottle and spray it very lightly on the mirror. After this, immediately wipe it with a microfiber cloth. If the mirror has any special coating on its edges or frame, it would be better to test it on a small area first.
Do not clean in a circular motion
While cleaning the mirror, moving the cloth in a circular motion is a common method, but this can spread the dirt from one place to another. Instead, the cloth can be run from top to bottom in a zig-zag or ‘S’ shape. This makes it easy to clean the entire mirror systematically. Once done cleaning with a wet cloth or cleaner, wipe in the same way with another dry microfiber cloth. This will help in removing the remaining moisture and will reduce the chances of streaks forming.
Read this also: Easy Garlic Peeling Trick: With this trick you will peel the entire garlic in 30 seconds, no need of a knife.
Be sure to wipe the edges at the end
While cleaning the center part of the mirror, the cleaner often collects at the edges. Later this liquid can flow downwards and form a new line. Therefore, after cleaning the entire mirror, wipe its edges and corners with a dry microfiber cloth. Pay special attention to the framed mirror and try not to let the cleaning liquid get inside the frame.
Take care of bathroom mirror like this
Due to high humidity in the bathroom, the mirror can quickly become cloudy and dirty. Therefore, it can be cleaned thoroughly at least once a week. It is also important to have ventilation in the bathroom after bathing, so that excess moisture can come out. Avoid touching the mirror frequently, as the natural oils present in fingers leave marks on the surface.
Read this also: Mopping Tips: House doesn’t smell even after mopping? Put this thing in a bucket of water, the fragrance will come.
